A green, facile, and practical preparation of capsaicin derivatives with thiourea structure | Scientific Reports

Scientific Reports volume 14, Article number: 10576 (2024) Cite this article

740 Accesses

1 Citations

3 Altmetric

Metrics details

Capsaicin derivatives with thiourea structure (CDTS) is highly noteworthy owing to its higher analgesic potency in rodent models and higher agonism in vitro. However, the direct synthesis of CDTS remains t one or more shortcomings. In this study, we present reported a green, facile, and practical synthetic method of capsaicin derivatives with thiourea structure is developed by using an automated synthetic system, leading to a series of capsaicin derivatives with various electronic properties and functionalities in good to excellent yields.

Capsaicin is an alkaloid found in the Capsaicin family1,2. In general, capsaicin was used for headaches3,4, muscular pain5,6, gastroenteric protection7,8 and to improve circulation9,10. In addition, capsaicin and other capsaicinoid compounds showed strong evidence of having promising potential in the fight against many types of cancer11,12,13. Consequently, many analogues of capsaicin (Fig. 1) have been synthesized and evaluated for diverse bioactivities, among which capsaicin derivatives with thiourea structure (CDTS) is highly noteworthy owing to its higher analgesic potency in rodent models and higher agonism in vitro (Ca2+ influx into dorsal root ganglia neurones)14.

Capsaicin and its derivatives with thiourea structure.

The pioneer work in the field was reported by Walpole et al. who employed EtOAc (Fig. 2a) or DMF (Fig. 2a) as the solvent to realize the synthesis of CDTS directly from vanilylamine or vanilylamine hydrochloride and Isothiocyanate15,16. However, these methodologies suffer from one or more shortcomings such as low yield, required chromatography fractionation (high consumption of organic solvents), use of toxic organic solvents (DMF, DCM and MeOH) and requirement of excess of Isothiocyanate. Therefore, further efforts are necessary in the design of novel, efficient and mild protocol wherever applicable to meet some of the green chemistry principles.

Previous studies and our work.

Additionally, because CDTS have strong irritancy, the synthesis and post-processing of CDTS will cause environmental pollution and make people feel uncomfortable. Recently, development of new technology that minimize pollution in chemical industry has received considerable attention due to growing environmental concerns. In this direction, with the development of automation technology, the automated synthetic systems have emerged as a useful tool to accelerate the research of organic synthesis and reduce the harm of chemicals to human body17,18. With these systems, several reactions were reported, including Suzuki coupling19,20,21, Buchwald-Hartwig amination22,23,24,25 and photordox-catalysed cross coupling26,27. Despite these elegant examples, an automated synthesis of CDTS has yet to be described.

Having the above points in mind, we wish to report on a green, facile, and automatic protocol for preparation of CDTS on a gram scale (Fig. 2c).

Initially, the vanilylamine hydrochloride (1) and 1-isothiocyanatoheptane (2a) were chosen as model substrates to optimize the reaction conditions, and the reaction was monitored by HPLC. The reaction of 1 and 2a was carried out in the presence of K2CO3 in EtOH at r.t. for 24 h. The reaction proceeded smoothly to give the vanilylthiourea (3a) in 34% yield (Table 1, entry 1). Then, a series of solvents was evaluated for the condensation reaction (entries 2–6). The results revealed that solvent effect played a crucial role; H2O is the best in terms of yields. This might be attributed to the poor solubility of K2CO3 in other solvents. Encouraged by this result, subsequently, different bases, including KOH, NaOH, Na2CO3, NaHCO3, Na2SiO3, CeCO3 and NEt3, were examined (entries 7–13), giving good to excellent yields except weak base NaHCO3 (entry 10), of which Na2SiO3 offered the highest yield (entry 11). It was noteworthy that the reaction hardly occurred in absence of base (entry 14). This could be larger due to the strength of base, leading to a lower solubility (weak base) of vanilylamine hydrochloride (1) or a higher solubility (strong base) of vanilylthiourea (3a). Additional efforts at reaction optimization(base loading and reaction time)provided the similar levels of selectivity. Finally, the optimized conditions were then concluded as follows: 1 (0.2 mmol), 2a (0.22 mmol) and Na2SiO3(0.22 mmol) in H2O (2 mL) at r.t. for 12 h, and 3a was obtained in 99% yield. Notably, the column chromatographic separation was not required. After simple filtration, 3a were obtained in 84% yields.

With the potential application of this versatile synthetic transformation (green solvents, mild reaction conditions, and simple post processing) to the chemical enterprise, we explored the development of an automated synthetic system to further demonstrate the synthetic utility of this method. As depicted in Fig. 3, the automated synthetic system manly consists of seven parts: (i) central control unit; (ii) solvents; (iii) syringe pump; (iv) selection valve; (v) reaction module; (vi) filter module; (vii) vacuum pump.

Photograph (a) and schematic (b) of the automated synthetic system.

As shown in Fig. 4a, the vanilylamine hydrochloride (1) and isothiocyanatoheptane (2a) were chosen as model substrates to validate the design concept of automated synthetic system and its potential for large scale production of thioureas with high yield. The automated synthetic system is capable of fulfilling the whole process of synthesis of 3a, in which a general six-step sequential unit operation is included as follows (Fig. 4b): (i) 1a (3 mmol), 2a (3.3 mmol), and Na2SiO3 (3.3 mmol) were added into the reaction module. (ii) H2O (30 mL) was then injected into reaction module, which is predetermined by the program med method using the syringe pump and solvent selection value. (iii) The mixture was stired for 12 h at r.t. (iv) The mixture was transferred to filter module and filtered by vacuum pump. (v) EtOH was then injected into filter module, which is predetermined by the program med method using the syringe pump and solvent selection value. (vi) The mixture was stired for 5 min, and then filtered to give the desired thiourea 3a in 84% yield.

(a) Gram-scale synthesis of 3a. (b) The representation of general six-step unit operation for 3a synthesis.

With the establishment of the optimized reaction conditions and the process of automated synthesis, a series of substrates was explored to determine the generality of this method, and the results are summarized in Fig. 5. In general, the corresponding thioureas 3a-3y were obtained with good to excellent yields (69–96%), except 3 l (50% yield). The chain length of the alkyl isothiocyanates tended to slightly influenced to the yield (3a vs 3b vs 3c vs 3d). The substituents of benzyl isothiocyanates could contain both electron-withdrawing and electron-donating groups at the para position of benzene rings, for example, -F (3f., 90% yield), -Cl (3 g, 78% yield), -OMe (3 h, 94% yield). 3,4-disubstituted benzyl isothiocyanate was viable substrate as well (3i, 81% yield). Under the standard conditions, product 3j was also smoothly yielded in excellent yields (92%). In contrast to phenylethyl isothiocyanate (2j), substrate 2 k bearing a strong electron withdrawing CF3 group at the at the para position of benzene ring led to a significantly reduction in yield (3 g, 82% vs. 3 k, 50%), while weakly electron withdrawing group (F, and Cl), and electron donating goups (Me, and MeO) at the at the para position of benzene rings had little effect on the yield (3 l-3o, 69–90% yield). Moreover, The good tolerance of the halogen atom (F, and Cl)at different positions on the benzene rings demonstrated good compatibility of the protocol(3 l vs. 3p vs. 3q, and 3 m vs. 3r vs. 3 s). After that, phenylpropyl isothiocyanates were also investigated, the reaction of substrates 2t and 2u readily took place under the optimized conditions, offering the corresponding products with good yields. Finally, the isothiocyanatobenzene, benzoyl isothiocyanate, and (R)-(1-isothiocyanatopropyl)benzene were also investigated. Products 3v-3 × were smoothly yielded in 78–87% yields.

Scope of substituted isothiocyanates. Reaction conditions: 1 (3 mmol), 2 (3.3 mmol) and Na2SiO3 (3.3 mmol) in H2O (30 mL) for 12 h (r.t.). Filtered yields.

To compare the efficiency of our method with the reported methods for the synthesis of CDTS, we have tabulated the results of these methods to promote the synthesis of compounds 3a, 3b, 3 g, 3j and 3u from. The results are summarized in Table 2. Obviously, our method showed a much higher yields and green.

In summary, an automated synthetic system have been have been developmented and evaluated as a equipment for the synthesis of capsaicin derivatives with thiourea structures via a condensation reaction of vanilylamine hydrochloride and isothiocyanates under room temperature and green solvent (water as solvent) conditions. The notable advantages of this method are automatic reaction and post-processing, mild reaction conditions, ready availability of starting materials, high functional groups tolerance, good to excellent yields. Thus, this procedure is a better and more practical alternative for green chemistry. Moreover, the analgesic potency in rodent models of these CDTS is being tested in our group.

Automated synthesis of CDTS 3. (i) 1 (3 mmol), 2 (3.3 mmol), and Na2SiO3 (3.3 mmol) were added into the reaction moldule. (ii) H2O (30 mL) was then injected into reaction moldule, which is predetermined by the program med method using the syring pump and solvent selection value. (iii) The mixture was stired for 12 h at r.t. (iv) The mixture was transferred to filter moldule and filtered by vacuum pump. (v) EtOH was then injected into filter moldule, which is predetermined by the program med method using the syring pump and solvent selection value. (vi) The mixture was stired for 5 min, and then filtered to give the desired thiourea 3.

Data is provided within the manuscript or supplementary information files.

Kosuge, S. & Furuta, M. Studies on the pungent principle of capsicum part XIV chemical constitution of the pungent principle. Agric. Boi. Chem. 34, 248–256 (1970).

CAS Google Scholar

Sawynok, J. Topical analgesics in neuropathic pain. Curr. Pharm. Des. 2005(11), 2995–3004 (2005).

Article Google Scholar

Peppin, J. F. et al. Tolerability of NGX-4010, a capsaicin 8% patch for peripheral neuropathic pain. J. Pain. Res. 4, 385–392 (2011).

Article CAS PubMed PubMed Central Google Scholar

Webster, L. R., Tobias, J. K. & Vanhove, G. F. Efficacy, safety, and tolerability of NGX-4010, capsaicin 8% patch, in an open-label study of patients with peripheral neuropathic pain. Diabetes Res. Clin. Pract. 93, 187–197 (2011).

Article CAS PubMed Google Scholar

Mason, L., Moore, R. A., Derry, S., Edwards, J. E. & McQuay, H. J. Systematic review of topical capsaicin for the treatment of chronic pain. BMJ. 328, 991 (2004).

Article CAS PubMed PubMed Central Google Scholar

Hempenstall, K., Nurmikko, T. J., Johnson, R. W., Hern, R. P. & Rice, A. S. Analgesic therapy in postherpetic neuralgia: a quantitative systematic review. PLoS Med. 2, 164 (2005).

Article Google Scholar

Wimalawansa, S. The effects of neonatal capsaicin on plasma levels and tissue contents of CGRP. J. Peptides 14, 247–252 (1993).

Article CAS Google Scholar

Abdel-Salam, O. M., Szolcsanyi, J. & Mozsik, G. Capsaicin and the stomach. A review of experimental and clinical data. J. Physiol. Paris. 91, 151–171 (1997).

Article CAS PubMed Google Scholar

Akerman, S., Kaube, H. & Goadsby, P. J. Vanilloid type 1 receptors (VR1) on trigeminal sensory nerve fibres play a minor role in neurogenic dural vasodilatation, and are involved in capsaicin-induced dural dilation. Br. J. Pharmacol. 140, 718–724 (2003).

Article CAS PubMed PubMed Central Google Scholar

Gupta, S., Akerman, S., Saxena, P. R., van den Goadsby, P. J. & Brink, A. M. Intravital microscopy on a closed cranial window in mice: a model to study trigeminovascular mechanisms involved in migraine. Cephalalgia 26, 1294–1303 (2006).

Article CAS PubMed Google Scholar

Surh, Y. Molecular mechanisms of chemopreventive effects of selected dietary and medicinal phenolic substances. Mutat. Res. 428, 305–329 (1999).

Article CAS PubMed Google Scholar

Anandakumar, P. et al. Beneficial influence of capsaicin on lipid peroxidation, membrane bound enzymes and glycoprotein profile during experimental lung carcinogenesis. J. Pharm. Pharmacol. 60, 803–808 (2008).

Article CAS PubMed Google Scholar

Bode, A. M. & Dong, Z. The two faces of capsaicin. Cancer Res. 71, 2809–2814 (2011).

Article CAS PubMed Google Scholar

Huang, X. F., Xue, J. Y., Jiang, A. Q. & Zhu, H. L. Capsaicin and its analogues: Structure-activity relationship study. Curr. Med. Chem. 20, 2661–2672 (2013).

Article CAS PubMed Google Scholar

Walpole, C. S. J. et al. Analogs of capsaicin with agonist activity as novel analgesic agents; structure-activity studies. 3. The hydrophobic side-chain" C-region". J. Med. Chem. 36, 2381–2389 (1993).

Article CAS PubMed Google Scholar

Wrigglesworth, R. et al. Analogues of capsaicin with agonist activity as novel analgesic agents: Structure—activity studies. 4. Potent. Orally Active Analgesics. J. Med. Chem. 39, 4942–4951 (1996).

CAS PubMed Google Scholar

Shevlin, M. Practical high-throughput experimentation for chemists. ACS Med. Chem. Lett. 8, 601–607 (2017).

Article CAS PubMed PubMed Central Google Scholar

Krska, S. W., Dirocco, D. A., Dreher, S. D. & Shevlin, M. The evolution of chemical high-throughput experimentation to address challenging problems in pharmaceutical synthesis. Acc Chem. Res. 50, 2976–2985 (2017).

Article CAS PubMed Google Scholar

Reizman, B. J., Wang, Y. M., Buchwald, S. L. & Jensen, K. F. Suzuki-Miyaura cross-coupling optimization enabled by automated feedback. Chem. Eng. 1, 658–666 (2016).

CAS Google Scholar

Perera, D., Tucker, J. W. & Brahmbhatt, S. A platform for automated nanomole-scale reaction screening and micromole-scale synthesis in flow. Science 359, 429–434 (2018).

Article ADS CAS PubMed Google Scholar

Beker, W., Roszak, R. & Wolos, A. H. Machine learning may sometimes simply capture literature popularity trends: a case study of heterocyclic Suzuki-Miyaura coupling. J. Am. Chem. Soc. 144, 4819–4827 (2022).

Article CAS PubMed PubMed Central Google Scholar

Boström, J., Brown, D. G., Young, R. J. & Keserü, G. M. Expanding the medicinal chemistry synthetic toolbox. Nat. Rev. Drug. Discov. 17, 709–727 (2018).

Article PubMed Google Scholar

Ahneman, D. T., Estrada, J. G. & Lin, S. Predicting reaction performance in C-N cross-coupling using machine learning. Science 360, 186–190 (2018).

Article ADS CAS PubMed Google Scholar

Kashani, S. K., Jessiman, J. E. & Newman, S. G. Exploring homogeneous conditions for mild Buchwald-Hartwig amination in batch and flow. Org. Process Res. Dev. 24, 1948–1954 (2020).

Article CAS Google Scholar

Li, B. et al. A deep learning framework for accurate reaction prediction and its application on high-throughput experimentation data. J. Cheminformatics. 15, 72 (2023).

Article Google Scholar

Chen, Y., Wang, X., He, X., An, Q. & Zuo, Z. Photocatalytic dehydroxymethylative arylation by synergistic cerium and nickel catalysis. J. Am. Chem. Soc. 143, 4896–4902 (2021).

Article CAS PubMed Google Scholar

Kariofillis, S. K., Jiang, S. & Zurański, A. M. Using data science to guide aryl bromide substrate scope analysis in a Ni/photoredox-catalyzed cross-coupling with acetals as alcohol-derived radical sources. J. Am. Chem. Soc. 144, 1045–1055 (2022).

Article CAS PubMed PubMed Central Google Scholar

Download references

These authors contributed equally: Lina Chen and Zhenhua Gao.

State Key Laboratory of NBC Protection for Civilian, Beijing, People’s Republic of China

Lina Chen, Zhenhua Gao, Xiandong Dai, Fanhua Meng & Yongbiao Guo

Sichuan University of Science and Engineering, Zigong, People’s Republic of China

Ye Zhang

You can also search for this author in PubMed Google Scholar

Y.G. conceived and directed the project. L.C., Z.G. and Y.Z. performed the experiments. X.D. and F.M. analyzed the results. L.C. and Z.G. wrote the main manuscript text. All authors reviewed the manuscript.

Correspondence to Yongbiao Guo.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

Chen, L., Gao, Z., Zhang, Y. et al. A green, facile, and practical preparation of capsaicin derivatives with thiourea structure. Sci Rep 14, 10576 (2024). https://doi.org/10.1038/s41598-024-61014-5

Download citation

Received: 24 January 2024

Accepted: 30 April 2024

Published: 08 May 2024

DOI: https://doi.org/10.1038/s41598-024-61014-5

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative