Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)
HomeHome > Products > Thiurams > Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)
Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)

Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)

Abstract CAPAC-ZMBT, (CAS No. 136-23-2), is a very fast primary or secondary (ultra) accelerator for natural and synthet
Basic Info
Model NO. ZMBT
Kind Accelerator
Appearance Powder
Transport Package 20kg/Bag or 20kg/Drum
Specification SGS
Trademark CapatueTM
Origin P. R. China
HS Code 2931909090
Production Capacity 1, 000ton/Year
Product Description
Abstract
CAPAC-ZMBT, (CAS No. 136-23-2), is a very fast primary or secondary (ultra) accelerator for natural and synthetic rubber. It is also a very rapid accelerator for NR and SBR lattices. Additionally it is used as an antioxidant in adhesive systems.

Identification
Name: Zinc 2-mercaptobenzothiazole(CAS No. 155-04-4 ),

Application
CAPAC-ZMBT in combination with CAPAC-ZDEC is mainly used in NR / Synthetic Rubber Latex compounds for the manufacture of Latex Thread, Latex Foam and other Latex based products. CAPAC-ZMBT in combination with basic secondary accelerators is used in Dry Rubber compounds for the manufacture of Footwear products, Hot air cured products, molded and extruded goods etc

Compounding Information
CAPAC-ZMBT is a Semi ultra-fast accelerator for NR, SBR, NBR, BR and other diene rubbers. The critical cure temperature of CAPAC-ZMBT is approx. 120° C and hence the dry rubber / NR latex based compounds are vulcanized quickly at 125° C. The state of cure developed by CAPAC-ZMBT is slightly lower than CAPAC-ZMBT; However, the scorch safety is much longer and hence CAPAC-ZMBT can be used in place of CAPAC-ZMBT or scorch control.
-CAPAC-ZMBT is mainly used NR & Synthetic Rubber Latex compounds along with CAPAC-ZDEC / CAPAC-ZDBC to improve the state of cure. CAPAC-ZMBT also improves the aging characteristics of NR Latex based vulcanizates.
-CAPAC-ZMBT does not influence the stability of latex compounds.

-CAPAC-ZMBT readily disperses in water in the presence of commonly used dispersing agents (e. G. Sodium salt of polymerized alkyl naphthalene sulfonic acid) and is usually used as a 50% dispersion in water for latex compounding applications. CAPAC-ZMBT has a sensitizing effect on NR Latex due to its thixotropic nature and this property favors NR latex foaming for the production of Latex Foam Products. The latex compounds in which this property is not desired; The thixotropic effect can be overcome by stirring.
-When used for compounding of Latex Foam manufacture; CAPAC-ZMBT and CAPAC-ZMBT combinations give Latex Foam products with high compression modulus and vulcanizable at 110° C. One can reduce the dosage of Zinc Oxide in Latex Foam compounds for optimization / adjustments in gelation periods.

-Normal dosages of Zinc Oxide and Stearic Acid are necessary when CAPAC-ZMBT is used for dry rubber compounding. However; Dosage of Zinc Oxide can be reduced considerably for certain specific applications.
-CAPAC-ZMBT can be activated by small dosages of basic accelerators such as TMTM, DPG, TMTD, ZDEC etc. Or even by other basic compounding materials. If required; Common acidic retarders or Pilgard PVI can be used to delay the on-set of cure.
-High Accelerator-Low Sulfur cure systems based on CAPAC-ZMBT offer excellent heat resistance to NR vulcanizates. CAPAC-ZMBT also acts as an effective retarder for Sulfur cure systems based on Thiurams & Dithiocarbamates as primary accelerators.

Handling Precautions
For detailed information on toxicological properties and handling precautions please refer to the current Material Safety Data Sheet. This information sheet can be downloaded from our web site or requested from the nearest our company and should be consulted before handling this product.

Storage and Shelf Life
It should be stored in dry, cool, ventilated room; Keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.

Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)

Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4)

Properties


ItemTypical Values


PowderDust-free PowderGranules
AppearanceLight yellow powder (Granule)

Initial Melting Point, ° C Min. 200.0200.0200.0
Heat Loss, % Max. 0.400.400.40
Zinc Content, %20.0-25.020.0-25.020.0-25.0
Residue on 150 µ M Sieve, % Max. 0.100.10-
Residue on 63 µ M Sieve, % Max. 0.400.40-
Oil Content, %-1.0~2.0-
Particle Size, mm--1.5-2.5